Sanyo PLC-XTC50AL Service Manual page 29

Mechanical Disassembly
8-1. Rear Fans Assy removal-1
1. Remove 1 screw-A (M3x6) and 1 screw-B (T3x8).
. Remove 1 screw-C (T.6x8) and remove the Thermal Protector (SW90)
and then remove the Side Shield Plate.
A
c
Thermal
protector
(SW90)
Side shield
plate
8-2. Rear Fans Assy removal-2
1. Remove 3 screws-D (T3x8) and remove the Rear Fan Assy.
. Remove the Security Hook.
3. Remove  screws-E (M3x8) each on the Fans (FN901, FN90, FN903).
Mount the fans as the label on each fan must be facing outside.
B
thermal protector (SW902) removal
Groove
FN901
e
FN903
e
e
e
-9-
c
t2.6x8
Spacer
SW90
Printed marker is
facing out side.
d d
d
e
FN90
Security
hook