Table of Contents
Advertisement
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the "Running on NTSC." message always appears on
the start-up screen each time you turn the product on.
[144] How to Use
Demo Mode
The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time. Normally select
[Off].
1. MENU →
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for
about one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded
date and time.
Off:
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC-UD10/AC-UD11 AC
Adaptor (sold separately).
Even if [On] is selected, the product does not start a demonstration if there is no movie file
on the memory card.
When [On] is selected, the product does not switch to power save mode.
[145] How to Use
HDMI Resolution
When you connect the product to a High Definition (HD) TV with HDMI terminals using an
HDMI cable (sold separately), you can select HDMI Resolution to output images to the TV.
1. MENU →
Changing settings
(Setup) → [Demo Mode] → desired setting.
Changing settings
(Setup) → [HDMI Settings] → [HDMI Resolution] → desired setting.
Setup menu
Setup menu
Hide quick links:
Advertisement
Table of Contents
