Connecting The Optional Wireless Receiving Amplifier - Samsung HT-Q20 Instruction Manual

Connecting the optional Wireless Receiving Amplifier

To connect the rear speakers wirelessly, you have to additionally purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have purchased the wireless receiving module (SWA-3000)
Rear Speaker (L)
1
Connect the front, center and
subwoofer speakers, referring to page 12.
2
Insert the TX card into the TX card
connection port on the back of the main unit.
•
Hold the TX card so that the slanted side faces
downward and insert the card into the port.
•
The TX card enables communication between the
main unit and the wireless receiver.
3
Connect the left and right rear
speakers to the wireless receiving
module.
4
Plug the power cord of the wireless
receiving module in the wall outlet and
switch the power switch 'ON'.
Caution
•
Do not insert a card other than the TX card dedicated for the product. The product might be damaged or it may not be removed easily.
•
Do not insert the TX card upside down or in reverse direction.
•
Insert the TX card when the main unit is turned off.Inserting the card when it is turned on may cause a problem.
•
If the TX Card is inserted in the main unit, the rear speakers don't output sounds.
Downloaded From TheatreSystem-Manual.com Manuals
WIRELESS RECEIVER MODULE
Front Speaker (R)
Center Speaker
Subwoofer
Rear Speaker (R)
Front Speaker (L)
TX card
Slanted side faces
14
GB