Connecting The Video Out To Tv - Samsung HT-Q20 Instruction Manual

Connecting the Video Out to TV

Choose one of the three methods for connecting to a TV.
METHOD 1
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 2
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
•
"COMPOSITE" or "RGB" will appear in the display.
At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".
•
If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
•
If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.
METHOD 3
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
Downloaded From TheatreSystem-Manual.com Manuals
Composite Video ............... Good Quality
Scart ............... Better Quality
Component (Progressive Scan) Video ............... Best Quality
•
When the Progressive scan mode is selected, the VIDEO output (Yellow) and
SCART output does not output any signal.
METHOD 1 METHOD 2
GB
METHOD 3
16