Table of Contents
Advertisement
Connecting the Speakers
Connecting the Main Unit and Subwoofer
Rear of Subwoofer
Connect the System Connector cable from the main unit to the System Connector on the Subwoofer.
Subwoofer Functions
Subwoofer : With a built-in, dedicated 165W amplifier, the Subwoofer generates rich bass sounds.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core to the power cord of the subwoofer, it will prevent help to prevent
RF interference from radio signals.
16
(Con't)
Rear of Main unit
1
Pull the fixing tab of the Toroidal ferrite core to open it.
2
Make a loop in the subwoofer power cord.
3
Attach the Toroidal ferrite core to the subwoofer power
cord as the figure shows and press it until it clicks.
Connecting the Optional Wireless Receiving Amplifier
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
WIRELESS RECEIVER MODULE
Rear Speaker (L)
1
Connect the front and center speakers to the Subwoofer, referring to
pages 15~16.
2
With the subwoofer turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the subwoofer.
Hold the TX card so that the slanted side faces leftward and insert the
card into the port.
The TX card enables communication between the subwoofer and the wireless receiver.
3
Connect the left and right rear speakers to the wireless receiving
Slanted side face left
module.
4
Plug the power cord of the wireless receiving module in the wall outlet
TX card
and switch the power switch <ON>.
• Do not insert a card other than the TX card dedicated for the product.
The product might be damaged or the card may not be removed easily.
• Do not insert the TX card upside down or in the reverse direction.
• If the TX Card is inserted, sound is not output from the Rear Speaker
connectors on the subwoofer.
Front Speaker (R)
Front Speaker (L)
Center Speaker
Rear of
Subwoofer
Rear Speaker (R)
ENG
17
Advertisement
Table of Contents
