QUICK GUIDE Hills TouchNAV Security System User reference guide Powering Up the System 1. Go into the garage and turn off the powerpack for the alarm at the switch. 2. Open the box and you will see a large battery. On the two front corners of the battery will be a metal pin.
Page 3
QUICK GUIDE Hills TouchNAV Security System User reference guide Overview Changing the Time & Date 1. Press Menu>Settings> enter Master Code (default 1234) 2. Select Time and Date. 3. Adjust the time and date using the arrows. 4. When finished, press the Home icon or use the back arrows.
QUICK GUIDE Hills TouchNAV Security System User reference guide Changing the User Code 1. Press Menu>Controls>Users> enter Master Code (default 1234) 2. Select Master User. 3. Here you have to option to change the name of the master user. If you wish to do this select change name, type the name and click enter.
QUICK GUIDE Hills TouchNAV Security System User reference guide Arming the System Disarming the System 1. Close all doors and make sure the area is protected. 1. There is a delayed entry period when you enter the house that lasts for 30 seconds from the front door and 90 seconds from 2.
Need help?
Do you have a question about the touchnav and is the answer not in the manual?
Questions and answers