Alarm Function - AEG MRC 4122 F N Instruction Manual

Tune into the preset station
Press the SET/MEM/M+ button (1) repeatedly in radio mode to scan through the preset
station memory.

Alarm function

Setting of the Alarm (in standby)
You can set two alarm times. Proceed as follows:
1. Press the button. The currently set alarm time is shown.
2. Keep the button pressed for approx. 3 seconds when the alarm time is displayed.
The hours of the currently set alarm time start to lash.
3. Use the buttons
4. Press the button for conirmation. The minutes start to lash.
5. Use the buttons
6. Now select the days you want the alarm to sound. The following selections can be
made:
• 1-5 = Monday to Friday
• 1-7 = Monday to Sunday
• 6-7 = Saturday and Sunday
• 1-1 = Weekday
6a. When you have selected the setting 1-1:
1. Press the button to select the weekday.
2. Make your selection with the buttons
day, 3 = Wednesday, 4 = Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday)
7. Press the button to conirm. Then select how you want to be awakened. Select from:
• "bu" (buzzer):
A buzzer sounds when the alarm time is reached. The buzzer interval increases
from slow to fast. The volume cannot be adjusted.
• Radio frequency is displayed:
As soon as your set alarm time is shown, the radio switches on. The last set station
is played. The volume increases slowly to the set volume. The volume cannot be
adjusted.
NOTE:
• The alarm function turns off automatically after 30 minutes until the next day.
• If a cable has been connected to the LINE IN socket, the device will wake you
with a signal sound even if a radio frequency has been set.
(7) and Y-M-D (8) for setting.
(7) and Y-M-D for setting.
English
Y-M-D. (1 = Monday, 2 = Tues-
and
71