General Information; Warranty - CYBEX 2.GO User Manual

Hide thumbs Also See for 2.GO:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

GENERAL INFORMATION

I.
Spread-squat position: By opening and closing the lower zipper, the seat width can be adjusted. Very small
children will already sit comfortably in the required "spread-squat position" without any adjustments to the
seat area. For older children, the seat area can be adjusted by opening the zipper over the entire length.
Children from approx. 10 months of age should sit in the narrowest position, thus allowing for more leg room
and freedom of movement.
IMPORTANT! IT IS MORE IMPORTANT THAT THE CHILD IS SITTING IN A SQUATTING POSITION RATHER
THAN A SPREADING POSITION.
II. Height adjustment: The waist belt has the function of a height adjustment system. (a) To carry smaller
children, the belt should be placed around the waist, allowing the child to sit at a higher position. (b) For larger
children the belt should be placed around the hips. The optimum sitting position is reached when the carrying
person can touch the child´s head with the lips and should be adjusted accordingly.
III. Connector belt: (a) For ease of use, the connector belt on the shoulder straps can be adjusted in both length
and height, (b) allowing it to be closed from behind the neck or behind the back.
IV. Width adjustment: Tighten the shoulder straps to the point that it is comfortable for yourself and your baby.
The adjustment of the width will also regulate the support of your child's back. Excess length from the straps
can be folded and placed in the loops provided on the shoulder straps.
PLEASE SEE TO IT THAT YOUR CHILD FORMS A SLIGHTLY ROUNDED BACK WHILE SITTING IN THE
CARRIER. HENCE DO NOT FASTEN THE SHOULDER STRAPS TOO TIGHTLY.
V. The bib: The bib can be removed and regularly washed. Please follow the washing instructions.
The Headrest can be used in 3 different ways
VI. Full support: You can adjust the width of the head support with the upper zipper. With the zipper all
the way closed, you will support your baby´s head in the sleeping position. The space of the headrest
can be individually adjusted to ensure a comfortable position for the baby. See picture II b.
VII. Headrest shortened: Should your child´s head no longer need supporting, the head rest can simply
be folded outwards. This position also allows the vision fi eld of your child to expand.
VIII. Inwards Mobility Seat: (a) Once your baby is approx. 6 months of age, the headrest can be
completely folded inward, so that the back is completely free and your child has more moving space.
(b) Unfasten the buckles for the head rest and fold it inwards. (c) Fasten the ends of the headrest to
the strap loops by using the snap buttons.
FORWARD CARRYING
1. Position the waist belt around your waist/hips, close the buckle and adjust the length until it sits tightly.
Please assure that the male part of the buckle is always fed through the elastic safety loop before closing the
buckle.
2. (a) Now lift your baby up to your chest and place it into the carrier. Bend the legs of your baby in such a
manner, that it is comfortable for your child and then wrap the carrier around the baby's back. (b) Please
make sure that the safety loops are closed if the child weighs under 7 kg.
3. (a) Put your arms through the shoulder straps and (b) fasten the straps together with the sternum strap
behind your back.
4. Now lead the arms of your baby through the arm openings, if necessary open the buckles of the headrest on
both sides.
FORWARD FACING SITTING POSITION
DUE TO POSSIBLE OVERSTIMULATION, WE ONLY RECOMMEND THE FORWARD CARRYING POSITION
FOR CHILDREN SIX MONTHS AND OLDER. FOR LONGER DISTANCES WE RECOMMEND TO CARRY
YOUR CHILD IN THE FORWARD OR THE BACK CARRYING POSITION.
5. Make sure that the sitting area is adjusted in the narrowest position, i.e. that the lower zipper is completely
closed. Keep the head support bent in the outward position and fasten it to the buckles of the headrest.
Follow points 1-4 as listed above.
BACK CARRYING POSITION
This carrying position should only be used when your baby is able to safely hold its own head. Fold the
headrest away towards the inner side of the carrier (see points VIII b and VIII c).
6. Position the waist belt around your waist/hips so that the carrier body is placed on your back, close the buckle
and adjust the length until it sits tightly. Please assure that the male part of the buckle is always fed through
the elastic safety loop before closing the buckle. Slip into the left shoulder strap.
9
7. Lift your baby up onto your right arm, then place your left hand on your back and take hold of your baby´s left
foot and then shift your baby into the carrier. To do so bend forward and continue to hold and support your
baby at all times. As soon as your baby sits safely, slip on the right shoulder strap.
8. Close the sternum strap in the height of your chest and if necessary adjust the width.
ATTENTION! HOLD AND SUPPORT YOUR BABY, BEFORE TAKING OFF THE SHOULDER STRAPS! PLEASE
SEE TO IT THAT YOUR CHILD FORMS A SLIGHTLY ROUNDED BACK WHILE SITTING IN THE CARRIER.
HENCE DO NOT FASTEN THE SHOULDER STRAPS TOO TIGHTLY.
HIP CARRYING POSITION
9. Place the waist belt around your hip/waist in a lateral position. Close the buckle and adjust the width
accordingly so that the belt sits tight. Please assure that the male part of the buckle is always fed through the
elastic safety loop before closing the buckle. Follow points 2-4 listed above.
NOTE! IN THIS POSITION THE TWO SHOULDER STRAPS VARY IN LENGTH. THE ONE THAT WILL RUN
ACROSS THE BACK IS THE SHORTER ONE.
While carrying your baby on the hip you also can use the headrest in the 3 different positions. (See
page 9)

WARRANTY

The following warranty applies solely in the country where this product was initially sold by a retailer to a
customer. The warranty covers all manufacturing and material defects, existing and appearing, at the date of
purchase or appearing within a term of two (2) years from the date of purchase from the retailer who initially sold
the product to a consumer (manufacturer's warranty). In the event that a manufacturing or material defect should
appear, we will – at our own discretion – either repair the product free of charge or replace it with a new product.
To obtain such warranty it is required to take or ship the product to the retailer, who initially sold this product to a
customer and to submit an original proof of purchase (sales receipt or invoice) that contains the date of purchase,
the name of the retailer and the type designation of this product. This warranty shall not apply in the event that
this product is taken or shipped to the manufacturer or any other person other than the retailer who initially sold
this product to a consumer. Please check the product with respect to completeness and manufacturing or material
defects immediately at the date of purchase or, in the event that the product was purchased in distance selling,
immediately after receipt. In case of a defect stop using the product and take or ship it immediately to the retailer
who initially sold it. In a warranty case the product has to be returned in a clean and complete condition. Prior to
contacting the retailer, please read this instruction manual carefully. This warranty does not cover any damages
caused by misuse, environmental infl uence (water, fi re, road accidents etc.) or normal wear and tear. It does
solely apply in the event that the use of the product was always in compliance with the operating instructions, if
any and all modifi cations and services were performed by authorized persons and if original components and
accessories were used. This warranty does not exclude, limit or otherwise affect any statutory consumer rights,
including claims in tort and claims with respect to a breach of contract, which the buyer may have against the
seller or the manufacturer of the product.
UK – AFTER SALES SERVICE:
If you need assistance, spare parts or you are unhappy with any aspect of the goods please contact
Customer Care on: +44 (0)845 268 2000, or e-mail us at: customer.care@mamasandpapas.com.
Visit our website at www.mamasandpapas.com for the latest product information.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents