Selecting The Mode Of Operation; Cleaning And Maintenance - Hyundai MC 24 Instruction Manual

Note
The minicooler should only be used in the car with the car engine running in order to protect the
battery. If the battery voltage drops below 11.7 V, the minicooler will stop.
b) 220-240 V / 50 Hz Alternating Current (AC)
Please note illustration (fig. 3)
1. Turn the S1 switch to OFF.
2. Connect the alternating current connection cable to the AC socket X1 on the minicooler
and to a correctly installed 220-240 V/50 Hz power socket.
3. Use the S2 switch to select a mode of operation.
4. Turn the S1 switch to AC.
The device now starts working. If you would like to switch it off, turn the S1 switch to OFF and
remove the connecting cable from the mains.
~230 V

SELECTING THE MODE OF OPERATION:

a) Cooling
- Turn the S2 switch to COLD.
- The L2 control lamp lights up — green color.
b) Warming
- Turn the S2 switch to HOT.
- The L1 control lamp lights up — red color.
Note
- Never leave finished meals in the with the appliance (HOT) function turned on for longer than
necessary. The meal could start to spoil.

CLEANING AND MAINTENANCE

1. Before any handling, unplug the power cord from the electric socket and wait until the
machine has cooled down. The machine should only be cleaned with a slightly damp cloth.
2. Do not use coarse and aggressive cleaning agents (e.g. sharp objects, scrapers,
diluting agents or other solvents). Clean lid unit with a soft and wet cloth with a little
detergent.
- Take care that the binding surfaces and the sealing elements are functional.
26 / 34