Special Safety Instructions For This Unit - Hyundai MC 24 Instruction Manual

• The manufacturer is not responsible for damage and injuries caused by improper use of the
appliance and the accessories (e.g. food deterioration, injury, cutting) and its guarantee for
the appliance does not apply in situations when the safety warnings above are not complied
with.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from
the socket (pull on the plug, not the cable) if the appliance is not being used and remove the
attached accessories.
L2
• Do not operate the machine without supervision. If you should leave the workplace, always
switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions ...".

SPECIAL SAFETY INSTRUCTIONS FOR THIS UNIT

L1
• Please read the operating instructions carefully before using the mini fridge for the first time!
• Select a suitable location for the product, such as a dry, flat, non-slip surface on which it is
easy to operate the machine.
• Ensure that the minicooler is sufficiently ventilated!
• Do not put any objects into the unit.
• The appliance is not suitable for transportation of corrosive or solvent-based substances.
• Don't reverse the mini refrigerator when loaded.
• Food is allowed to be stored in its original packaging or suitable containers.
• Liquids and ice shall be put in the box only in suitable containers.
• Do not cover the device or place any objects on it. Danger of overheating!
• This device must not be used in the immediate vicinity of a bathtub, shower or swimming pool.
Never operate the heater when you are in any of the above.
• Keep a safety distance of 60 centimetres.
• After finishing work and before cleaning, always switch off the appliance and
disconnect it from power supply by taking the power cord connector out of the electric
socket. Do not overload the unit.
DESCRIPTION OF THE CONTROLS (fig. 1)
L1 Control lamp HOT
– red light
L2 Control lamp COLD
– green light
S1 Switch DC/OFF/AC
S2 Switch HOT/COLD
X1 Connection socket
AC 220-240 V ~50Hz
X2 Connection socket DC 12V
W1 Connection cable DC 12V
W2 Connection cable
AC 220-240 V ~50Hz
S2
S1
L2
L1
24 / 34
X2
X1
S2 S1
X2 X1