Speech; Settings Wizard - Nokia RM-230 User Manual

Online time—to set the data call to disconnect automatically after a time-out if
there is no activity. To enter a time-out, select
minutes. If you select Unlimited, the data call is not disconnected automatically.
SIP settings
View and edit session initiation protocol (SIP) profiles.
Configurations
Certain functions, such as web browsing and multimedia messaging, may require
configuration settings. You may receive the settings from your service provider.
See "Configuration settings," p. 13.
To delete a configuration, scroll to the configuration, and select
Access point name control
With the access point name control service, you can restrict the use of packet data
access points. This setting is only available if your SIM card supports the service.
To change the settings, you need the PIN2 code.
Applications
To view and edit settings of applications installed to your phone, select
Settings > Phone sett. > Applications.

■ Speech

In Speech, you can select the default language and voice used for reading
messages and adjust the voice properties, such as rate and volume. Select
Settings > Speech.
To automatically detect the language of a message and read the message using
that language, select Language detection
is no voice available for the language or if
default language is used.
To view details of a voice, scroll right, scroll to the voice, and select
Voice details. To test a voice, scroll to the voice, and select

■ Settings wizard

Sett. wizard configures your device for operator (MMS, GPRS, and internet) and
e-mail settings based on your service provider. Configuring other settings may
also be possible.
80
User defined, and enter the time in
Options
> On. When reading a message, if there
Language detection is set to Off, the
Options
Options > Play
> Delete.
Menu >
Menu >
>
voice.