Information For Test Institutes; Before First Use - Zanussi ZDS22002WA User Manual

Programme
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes
and bad odours to come out from the appliance. Do not use detergent with this programme.

INFORMATION FOR TEST INSTITUTES

For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container with special salt for
dishwasher.
6
Degree of soil
Programme phases
Type of load
Normal soil •
Crockery •
and cutlery •
•
Heavy soil •
Crockery, •
cutlery, pots •
and pans •
Fresh soil •
Crockery
and cutlery •
All •
Duration
Prewash 100 -
Wash 65 °C 110
Rinses
Dry
Prewash 130 -
Wash 70 °C 150
Rinses
Dry
Wash 60 °C or 30
65°C
Rinse
Prewash 14
Write down the product number (PNC) that is on
the rating plate.
3. Fill the rinse aid dispenser with special rinse
aid for dishwasher.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
Consumption values
1)
Energy
(min) (kWh)
1.2 - 1.6
1.0 - 1.2
0.8
0.1
Water
(l)
15 - 16
11 - 13
8
4