Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDS 2010
Summary of Contents for Zanussi ZDS 2010
- Page 1 User manual Dishwasher ZDS 2010...
-
Page 2: Table Of Contents
• This appliance is intended to be used in • Make sure not to cause damage to the water household and similar applications such as: hoses. – Staff kitchen areas in shops, offices and other working environments – Farm houses www.zanussi.com... -
Page 3: Product Description
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Product description Worktop Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com... -
Page 4: Control Panel
65º A30’ On/off indicator Delay button Programme marker Start button Indicators Programme knob Indicators Description End indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme oper- ates. www.zanussi.com... -
Page 5: Programmes
4. Open the water tap. clean and in good conditions. Refer to the table 5. Processing residues can stay in the appli- to adjust the water softener to the right level. It ance. Start a programme to remove them. www.zanussi.com... -
Page 6: The Appliance
2. Press and hold the start button. At the same programme. time turn the programme knob clockwise until the programme marker is aligned with the first programme on the control panel. www.zanussi.com... -
Page 7: Daily Use
Refer to ’SET- 3. Load the baskets. TING AND STARTING A PROGRAMME’. 4. Add the detergent. Set the correct programme for the type of 5. Start the programme. load and the degree of soil. www.zanussi.com... - Page 8 The rinse aid indicator al- ways comes on if the rinse aid dispenser is empty. 1. Adjust the water softener to the lowest lev- 2. Set the rinse aid dispenser to the lowest position. www.zanussi.com...
- Page 9 The start indicator comes on. • There can be water on the sides and on Starting a programme with delay start the door of the appliance. Stainless steel becomes cool more quickly than 1. Set the programme. the dishes. www.zanussi.com...
-
Page 10: Care And Cleaning
The appliance does not start or it stops during With some problems, different indicators operation. flash continuously or intermittently at the Before you contact the Service, refer to the in- same time to show an alarm code. formation that follows for a solution to the prob- lem. www.zanussi.com... - Page 11 If the problem occurs again, contact the Serv- gramme knob until the programme marker is ice. aligned with programme that was in operation If other alarm codes show, contact the Service. when the problem occurred. The programme continues from the point of interruption. www.zanussi.com...
- Page 12 The dishes are wet and The rinse aid dispenser is empty. Make sure that there is rinse aid in the matt. rinse aid dispenser. The quality of the rinse aid can be the Try a different brand of rinse aid. cause. www.zanussi.com...
-
Page 13: Technical Information
By ensuring this product where you purchased the product. is disposed of correctly, you will help prevent potential negative consequences for the • Discard correctly the packaging material. Re- cycle the materials with the symbol www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...