Before You Begin - Pro-Form 385e User Manual

BEFORE YOU BEGIN

Thank you for selecting the PROFORM 385e treadmill.
The PROFORM 385e treadmill combines advanced
technology with innovative design to let you enjoy an
excellent form of cardiovascular exercise in the conve-
nience and privacy of your home. And when you're not
exercising, the unique PROFORM 385e can be folded
up, requiring less than half the floor space of other
treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
Towel Rack
Accessory Tray
Storage Latch
LEFT SIDE
Cushioned Walking
Platform for maximum
exercise comfort
4
please call our Customer Service Department at
0345-089009. To help us assist you, please note the
product model number and serial number before call-
ing. The model number of the treadmill is PETL39070.
The serial number can be found on a decal attached to
the treadmill (see the front cover of this manual for the
location).
Before reading further, please review the drawing
below and familiarise yourself with the labelled parts.
Water Bottle Holder
(Water Bottle is not
included)
Key/Clip
Handrails
Circuit
Breaker
Walking Belt
Foot Rails
Incline Leg
Rear Roller
Adjustment Bolt
b. If the walking belt has shifted to the right, first remove the
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment bolt counterclock-
wise, and the right bolt clockwise, 1/4 of a turn each. Be care-
ful not to overtighten the walking belt. Plug in the power cord,
insert the key and run the treadmill for a few minutes. Repeat
until the walking belt is centred.
c. If the walking belt slips when walked on, first remove the
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment bolts clockwise, 1/4 of
a turn. When the walking belt is correctly tightened, you
should be able to lift each side of the walking belt 2 to 3
inches off the walking platform. Be careful to keep the walking
belt centred. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is
properly tightened.
6. SYMPTOM: THE TREADMILL SITS UNEVENLY ON THE FLOOR
a. Make sure that the four leg pads are attached to the treadmill. (See assembly step 1 on page 5.)
7. SYMPTOM: THE INCLINE SYSTEM STICKS
a. Raise the treadmill to the storage position. (See HOW TO FOLD THE TREADMILL FOR STORAGE on page
10.) Pivot the incline leg several times to break in the incline system.
BACK
b
c
13