Table of Contents

Advertisement

12. Others

Troubleshooting

First, try out the following procedures
If the problem is not resolved, it may be improved by selecting [Reset]
the [Setup] menu.
Battery and power source
When I shake the camera, I hear a rattling sound from the camera.
The sound is caused by the In-Body Image Stabilizer. This is not a malfunction.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
The battery is exhausted. Charge the battery.
This unit is turned off automatically.
[Economy] is enabled.
The charging lamp blinks.
This phenomenon occurs when charging in a location where the temperature is very high or
very low.
> Reconnect the USB connection cable (supplied) in a location where the ambient
temperature (and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF) range,
and try charging again.
If your PC is not capable of supplying sufficient power, charging is not possible.
The battery becomes flat too quickly.
When [
] ([4K Pre-Burst]) is set, the battery drains faster.
> Select [
] ([4K Pre-Burst]) only when recording.
Is a Wi-Fi connection being used for a long period of time?
The battery can become flat quickly when connected to Wi-Fi.
> Turn the camera off frequently by using the [Economy] etc.
Recording
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
Is [Focus/Release Priority] in the [Custom] menu set to [FOCUS]?
You cannot take a picture until the subject is brought into focus.
(P318
(P223)
to P327).
(P19)
(P223)
318
(P226)
(P212)
on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents