12. Others
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P329
when the image sensor gets dirty.
The recorded picture is too bright or dark.
•
Is the AE Lock
(P109)
Multiple pictures are taken at one time.
•
Check the drive mode setting.
•
Are you using the bracket function?
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
•
Is [Shutter AF] in the [Custom] menu set to [OFF]?
•
Is the AF Lock
(P109)
The recorded picture is blurred.
The Image Stabilizer is not effective.
•
The shutter speed will become slower and the Image Stabilizer function may not work properly
when taking pictures especially in dark places.
> We recommend using a tripod and the self-timer
shutter speed.
The recorded picture looks rough.
Noise appears on the picture.
•
Try the following:
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
> Set the [Long Shtr NR] to [ON].
The subject appears distorted on the picture.
•
If you record a moving subject when using the electronic shutter or recording motion picture or
a 4K photo, the subject may appear distorted on the picture. This is characteristic of MOS
sensors which serve as the camera's pickup sensors. This is not a malfunction.
applied incorrectly?
(P134)
(P138)
applied incorrectly?
(P112)
(P202)
(P210)
(P137)
when taking pictures with a slow
(P189)
319
(P212)