Table of Contents

Advertisement

5. 4K Photo and Drive Settings

Self-timer

Setting the self-timer
After pressing 3 in step
time, and press [MENU/SET].
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about
2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
When using a tripod, etc., this setting is a convenient
way to avoid the jitter caused by pressing the shutter
button.
After the self-timer indicator flashes, recording starts.
Focus and exposure will be set when the shutter button is
pressed halfway.
We recommend using a tripod when recording with the
self-timer.
Not available in these cases:
It cannot be set to [
When recording with [Post Focus]
When recording with the shutter speed set to [T] (Time)
When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON]
When recording with the Bracket function
When using [Multi Exp.]
Self-timer is disabled in the following cases.
When recording motion pictures
When using [Time Lapse Shot]
When using [Stop Motion Animation] (only when [Auto Shooting] is set)
2
on P134, press 2/1 to select the
] in the following cases.
137
10
10
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents