Table of Contents

Advertisement

9. Using Menu Functions

[Multi Exp.]

Applicable modes:
Gives an effect like multi exposure. (up to 4 times equivalent per a single image)
>
[Rec] > [Multi Exp.]
MENU
1
Press 3/4 to select [Start] and then press [MENU/SET].
2
Decide on the composition, and take the first picture.
After taking the picture, press the shutter button halfway
down to take the next picture.
Press 3/4 to select the item and then press [MENU/SET]
for one of the following operations.
[Next]:
[Retake]:
[Exit]:
3
Shooting the second, third, and fourth exposures.
If [Fn3] is pressed while taking pictures, the photographed images are recorded, and the
multiple exposure picture-taking session will be completed.
4
Press 4 to select [Exit] and then press [MENU/SET].
You can also press the shutter button halfway to finish.
Changing settings
[Auto Gain]
[Overlay]
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
Items shown in gray on the menu screen cannot be set during multiple exposures.
[Overlay] is available only for RAW images taken with this unit.
Not available in these cases:
This function is not available in the following cases:
When using [Time Lapse Shot]
When using [Stop Motion Animation]
Advance to the next picture.
Return to the first picture.
Record the image of the first picture, and
finish the multiple exposure picture-taking
session.
If you select [OFF], all exposure results are superimposed as they are.
Compensate the exposure as necessary, depending on the subject.
If you select [ON], you can apply Multi Exposure to previously recorded
images. After [Start] is selected, images on the card will be displayed.
Select a RAW image, and press [MENU/SET] to proceed to recording.
198

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents