Installation Steps; Package Contents; Recommended Tools - Axis M11-E Installation Manual

Installation Guide
This Installation Guide provides instructions for installing AXIS M1124-E/M1125-E Network
Camera on your network. For other aspects of using the product, see the User Manual available
at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 7.
2. Study the hardware overview. See page 8.
3. Study the specifications. See page 13.
4. Install the hardware. See page 15.
5. Access the product. See page 21.

Package Contents

• AXIS M1124–E/M1125–E Network Camera
• Terminal block connector kit
• AXIS T93G05 Protective Housing
- AXIS Gasket C M20 (x1)
- Desiccant bag
- Torx screwdriver T20
- AXIS Connector Guard A
• AXIS T94Q01A Wall Mount
- Screw bit T30
• Printed materials
- Installation Guide (this document)
- Installation Guide for AXIS T94Q01A Wall Mount
- Extra serial number label (2x)
- AVHS Authentication key

Recommended Tools

• Drill – for installing the wall mount
• Screw driver for screw bit
AXIS M11-E Network Camera Series
7