instructions on the screen. Or, open one of the access
point groups, select an access point marked with
select Edit.
Follow the instructions from your service provider.
Access point name
●
name from your service provider.
User name
— The user name may be needed to make
●
a data connection, and is usually provided by the
service provider.
Prompt password
●
every time you log in to a server, or if you do not want
to save your password in the device, select Yes.
Password
— A password may be needed to make a
●
data connection and is usually provided by the service
provider.
Authentication
— Select
●
password encrypted or
encrypted when possible.
Homepage
— Depending on the access point you are
●
setting up, enter the web address or the address of the
multimedia messaging centre.
Select
Options
Advanced settings
>
following settings:
Network type
— Select the internet protocol type to
●
transfer data to and from your device. The other
settings depend on the selected network type.
148
— You obtain the access point
— If you must enter the password
Secure
to always send your
Normal
to send your password
to change the
Phone IP address
●
, and
address of your device.
DNS addresses
●
primary and secondary DNS servers, if required by your
service provider. Contact your internet service provider
to obtain these addresses.
Proxy server address
●
proxy server.
Proxy port number
●
proxy server.
WLAN internet access points
Press
, and select
Destinations
instructions on the screen. Or, open one of the access
point groups, select an access point marked with
select Edit.
Follow the instructions from your WLAN service provider.
WLAN network name
●
Search for
networks. If you select an existing
network,
WLAN network mode
mode
are determined by the settings of its access
point device.
Network status
●
is displayed.
WLAN network mode
●
ad hoc network and to allow devices to send and
(for IPV4 only) — Enter the IP
— Enter the IP addresses of the
— Enter the address of the
— Enter the port number of the
Tools
Settings
>
New access
point, and follow the
>
— Select
Enter manually
and
— Define whether the network name
— Select
Ad-hoc
© 2008 Nokia. All rights reserved.
Connection
>
>
, and
or
WLAN security
to create an