Access Points - Nokia N77 User Manual

Access points

You may receive access point settings in a message from a
service provider. See 'Data and settings', p. 79. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them. indicates a protected access point, and
indicates a packet data access point.
To create a new access point, select
point. Select Use default settings
access point settings or Use existing settings
existing access point as the basis for the new access point.
To edit the settings of an access point, select
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point
from your service provider.
User
connection, and is usually provided by the service
provider.
Options > New access
Prompt
to use the default
time you log in to a server or if you do not want to save
to select an
your password in the device, select Yes.
Password—A password may be needed to make a data
Options >
connection and is usually provided by the service provider.
Authentication—Select
Homepage—Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.
Select
following settings:
Network
IPv4
network type.
Phone IP address
your device.
name—You obtain the access point name
name—The user name may be needed to make a data
password—If you must enter the password every
Normal
Options > Advanced settings
type—Select the internet protocol type to use:
or IPv6. The other settings depend on the selected
(for IPv4 only)—Enter the IP address of
or Secure.
to change the
107