Disassembly And Assembly Instructions; Remove The P-Board; Remove The Pb-Board; Remove The Rear Cover - Panasonic TH-C42FD18 Service Manual

7 Disassembly and Assembly Instructions

7.1.

Remove the Rear cover

1. See Service Hint (Section 3)
7.2. Remove the Fan unit
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3
3. Remove the relay connectors and remove the Fan unit.
4. Remove the screw (×1
5. Remove the Fan.
7.3.

Remove the PB-Board

1. Unlock the cable clampers to free the cable.
2. Remove the screws (×2
3. Remove a short-jumper connectors (PB31 and PB32)
and re-use for new PB-Board.
4. Disconnect the connectors (PB30, PB33, PB34, PB35,
PB36 and PB37)
6. Remove the screws (×20
).
) on the back side.
).
) on the back side.
5. Remove the PB-Board.
7.4.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (P2, P6, P7, P9, P11, P12 and
P25).
3. Remove the screws (×6
unit.
4. Remove the molding props (×2
5. Remove the barrier (P).
17
) and remove the P-Board
).