Table of Contents
Advertisement
Using VoicE actiV atED Dialing
To use voice activated dialing, the voice activated dialing feature must be
enabled on your device. See your Bluetooth device manual for instructions.
With the headset on, one long press on the call control button activates the
voice activated dialing feature on the headset.
mUl tiPlE UsEs of a long PrEss on tHE call
control BUtton
heAdset fUnction
Turn on power
Re-link to
Bluetooth device
Reject call
Transfer a call between
Headset and Bluetooth device
Voice activated dialing
statUs inDicators
heAdset stAtUs
Powering on
Power on
Powering off
Power off
Charging battery
Battery fully charged
Discovery state
Missed call
On Line Indicator (OLI)
Low battery
1
stAte of the
BlUetooth deVice
Link dropped
Incoming call
Ringing
Power off
Power on
Power on
Disconnects the call or sends the call to
Linked
Power on
Linked
On a call
Power on
Linked
No call
heAdset stAtUs indicAtor
Blue light appears and flashes every 6 seconds
Blue light flashes every 6 seconds
Red light appears and goes off
Indicator flashes blue and red for 30 seconds
Infrequent flashing blue/red
Press any button to cancel
Rapid flashing blue/red
Blue flash every 10 seconds
resUlt
Turns the power on
Re-links the device
voice mail depending on your device
Transfers the call from
one device to another
Activates the voice recognition feature
Indicator is not lit
Red light is on
Red light is off
Flashes red
Advertisement
Table of Contents
