WElcomE This User Guide provides instructions for setup and use of the Plantronics Discovery 640E Bluetooth Headset. ® Before getting started, please review the safety booklet included in your package. For additional help, service or support information, refer to your product warranty card or visit www.plantronics.com.
PackagE contEnts anD fEatUrEs Headset Headset status indicator Call control button (on/off) Volume/mute button Headset carrying pocket Battery charger Battery holder Battery (AAA)** Optional ear stabilizer Soft gel ear tip small medium large Microphone AC power adapter **Only replace with a non-rechargeable...
The battery charger and AAA charging adapter are connected to the headset carrying pocket by pushing the two components together. Ensure that the indent on the attachment lines up with the shirt clip on the headset carrying pocket.
YoUr HEaDsEt Prior to first use, the Plantronics Discovery 640E headset must be charged for a minimum of 1 hour; 3 hours for full charge. An AC power adapter is included. You may also charge the headset using the AAA battery charger.
Devices, ” or equivalent, to activate the scan for the headset. When the phone display shows the scan results, select “6xx Plantronics”. The phone will continue to search for the headset. When the phone display asks for a passkey, type “0000”...
*Neutral Position fitting YoUr HEaDsEt The headset comes with three soft gel ear tips and an optional ear stabilizer. The medium sized ear tip is installed for wearing on the right ear. Twist the ear tip to the right for left ear wearing.
To end a call, briefly press the call control button. If the headset is in the headset carrying pocket when a call is received, the carrying pocket will vibrate. Removing the headset from the pocket will answer the call.
To use voice activated dialling, the voice activated dialing feature must be enabled on your device. See your Bluetooth device manual for instructions. With the headset on, one long press on the call control button activates the voice activated dialling feature on the headset.
Press the call control button for 2 seconds until you hear a beep or see the headset status indicator glow blue. Move the headset closer to the phone or Bluetooth device. Charge your battery using the AC power adapter supplied, or a AAA battery charger.
To obtain service in Australia, contact Plantronics at 1800 793 150 or 1800 428 526. To obtain service in New Zealand, contact Plantronics at 00 800 5444 6600. Or visit the support section of our website at www.plantronics.com for technical assistance.
Page 12
Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics is under license. All other trademarks are the property of their respective owners.