Wireless Lan Plugins - Nokia ESERIES E63 User Manual

WPA security settings
Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings
WPA/WPA2 — Select
•
Protocol) or Pre-shared key
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key — If you select
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA2 only mode — To allow both TKIP and AES
•
(Advanced Encryption Standard) encryption, select Off. To
allow AES only, select

Wireless LAN plugins

Select Menu Tools
> >
points.
The EAP (extensible authentication protocol) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).
118
and from the following:
EAP (Extensible Authentication
(a secret key used for device
— If you select WPA/WPA2
WPA/WPA2
>
On
Settings Connection
>
EAP plug-ins
1. To define the EAP plug-in settings, select
access point
as a data bearer.
2. Select 802.1x
3. Select WLAN security settings
EAP plug-in
>
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the
Pre-
access point, select the desired plug-in and
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
Options
>
before other plug-ins when connecting to the network with
Access
the access point, or
>
plug-in for network authentication after attempting to use
other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu
settings.
and define an access point that uses WLAN
or WPA/WPA2 as the security mode.
>
settings.
> Disable.
Raise priority to attempt to use the plug-in
Options Lower priority
>
Tools Settings
> > >
© 2010 Nokia. All rights reserved.
Options New
>
WPA/WPA2 EAP
> >
Options
>
Options > Edit.
to use this
Connection SIP
>