Wep Key Settings; Wlan Security Settings; Wep Security Settings - Nokia ESERIES E63 User Manual

Radio measurements
•
measurements.
Power saving — Select whether to use the WLAN power
•
saving mechanism to save the power in the device battery.
Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
Options Restore defaults.
>

WLAN security settings

Select Menu Tools
> >
points Options New access
> >
point and Options > Edit.
In the access point settings, select
the desired mode.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the network
is denied to users who do not have the required WEP keys.
When the WEP security mode is in use, and your device
receives a data packet not encrypted with the WEP keys, the
data is discarded.
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
WEP key in use — Select the desired WEP key.
•
© 2010 Nokia. All rights reserved.
— Enable or disable the radio
Settings Connection
>
point, or select an access
WLAN security mode
and from the following:
Authentication type
•

WEP key settings

•
WEP key settings
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
from the following:
WEP encryption
•
length.
WEP key format
•
Access
> WEP key data in
WEP key
•
and
802.1x security settings
Select 802.1x
802.1x authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select WLAN security settings
WPA/WPA2
•
Protocol) or
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
— Select Open
— Edit the settings for the WEP key.
WEP key settings
>
— Select the desired WEP encryption key
— Select whether you want to enter the
ASCII or Hexadecimal
— Enter the WEP key data.
as the WLAN security mode.
and from the following:
— Select EAP (Extensible Authentication
Pre-shared key (a secret key used for device
— If you selected
— If you selected
or Shared.
and
format.
WPA/WPA2
>
WPA/WPA2 Pre-
>
117