Advanced Wlan Settings - Nokia ESERIES E63 User Manual

web pages, you must first define access points for these
services.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create, edit,
or remove them.
To create a new access point, select
point or select an existing access point from the list and then
Options Duplicate access point
>
as a basis for the new one.
Packet data (GPRS) settings
Select Menu Tools
> >
data.
Your device supports packet data connections, such as GPRS
in the GSM network. When you are using your device in GSM
and UMTS networks, it is possible to have multiple data
connections active at the same time; access points can share
a data connection, and data connections remain active, for
example, during voice calls.
manager", p. 99.
To define the packet data settings, select
connection and select When available
device to the packet data network when you switch the
device on in a supported network, or
establish a packet data connection only when an application
or action requires it. Select
point name provided by your service provider to use the
device as a packet data modem to your computer.
These settings affect all access points for packet data
connections.
116
Options New access
>
to use the access point
Settings Connection
>
See "Connection
Packet data
to register the
When needed
Access point and enter the access
WLAN settings
Select Menu
Wireless LAN.
To have an indicator displayed when there is a WLAN
available in your current location, select
availability
To select the interval for your device to scan for available
WLANs and update the indicator, select
This setting is not available unless you select
availability

Advanced WLAN settings

Packet
>
Select Options
settings are normally defined automatically, and changing
them is not recommended.
To edit the settings manually, select
configuration
Long retry limit
•
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
Short retry limit
•
transmission attempts if the device does not receive a
to
clear-to-send signal from the network.
RTS threshold
•
WLAN access point device issues a request to send before
sending the packet.
TX power level
•
when sending data.
Tools Settings
> > >
> Yes.
> Yes.
Advanced settings. The advanced WLAN
>
Automatic
> Disabled, and define the following:
— Enter the maximum number of
— Enter the maximum number of
— Select the data packet size at which the
— Select the power level of your device
© 2010 Nokia. All rights reserved.
Connection
>
Show WLAN
Scan for networks.
Show WLAN