Log; Recent Calls; Call Duration - Nokia E72 User Manual

Log

The log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.

Recent calls

Select Menu Log
>
To view missed, received, and dialed calls, select
calls, Received calls
Tip: To open the dialed numbers list in the home
screen, press the call key.
Select Options and from the following:
Save to Contacts
•
number from a recent calls list to your contacts.
Clear list — Clear the selected recent calls list.
•
Delete — Clear a highlighted event in the selected list.
•
Settings — Select
•
that the communication information is saved in the log.
If you select No

Call duration

Select Menu > Log.
To view the approximate duration of your last call, and
dialled and received calls, select
38
and Recent calls.
or Dialed numbers.
— Save the highlighted phone
Log duration and the length of time
log, no information is saved in the log.
Call timers.
Packet data
Select Menu
You may be charged for your packet data connections by
the amount of data sent and received. To check the
amount of data sent or received during packet data
connections, select
received data.
To clear both sent and received information, select
Options Clear
>
clear the information.
Missed
Monitor all communication
events
Select Menu
To open the general log where you can monitor all voice
calls, text messages, or data and wireless LAN connections
registered by the device, select the general log tab
. Subevents, such as a text message sent in more
than one part and packet data connections, are logged as
one communication event. Connections to your mailbox,
multimedia messaging center or web pages are shown as
packet data connections.
To view how much data was transferred and how long a
certain packet data connection lasted, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View.
To copy a phone number from the log to the clipboard, and
paste it into a text message, for example, select
Use number
> Log.
Packet data All sent
>
counters. You need the lock code to
> Log.
> Copy.
dataor All
Options
>