Dirna DINAMIC 1.1 bycool Mounting Instructions page 20

DINAMIC 1.1
EN
CABIN EXTERIOR:
3
Introduce the template level using the exterior,
taking as reference the Ø4 bore made, mark
and make the remaining bores.
Introduce M6 studs in the interior with a nut
4
and washer as indicated.
Secure the exterior with a rubber washer, a
5
flat washer and a self-locking nut, securing at
the bottom with a socket wrench of 10.
Position bushing and nut covers.
6
Pass the waste water pipe through the bore of
7
Ø19, through the bushing, towards the inside
of the cabin.
4
7
5
20
dirna
, s.a.
6
6