Cleaning And Maintenance; Descaling Systems - Bosch Sensixx’x DA70 EasyComfort Operating Instructions Manual

3 Switch the steam regulator (5) from
back again several times (self- cleaning). Set the
steam regulator to the position
4 Set the iron aside in a vertical position on its heel (11)
to cool down.
5 Coil the power cable (12) loosely around the heel of
the iron. Store the iron in an upright position.
Tip: For immediate storage of the iron, you may use the
"StoreProtect " accessory (see "Accessories" section).
Cleaning & Maintenance
E
Attention! Risk of burns!
Always unplug the appliance from the mains
supply before carrying out any cleaning or
maintenance operation on it.
1 If the iron is only slightly soiled, pull out the plug
and allow the soleplate (10) to cool down. Wipe the
housing and the soleplate with a damp cotton cloth
only.
2 To keep the soleplate smooth, you should avoid hard
contact with metal objects. Never use a scouring pad
or chemicals to clean the soleplate.

Descaling systems

AntiCalc
a "self-clean"
Each time you use the steam regulator (5), the "self-clean"
system cleans the mechanism of scale deposits.
B "anti-calc"
The "anti-calc" cartridge has been designed to reduce the
build-up of scale produced during steam ironing.
to and
.
19
BOS CH