Table of Contents
Advertisement
The access codes may only include the digits 0 to 9.
Lock system(3-3-6)
In this submenu, you can lock the communicator. Press Select and enter your lock
code. The communicator locks immediately. When your communicator is locked,
you can make emergency calls to predefined numbers using the cover phone. You
can also answer incoming calls and make emergency calls using the Telephone
application. All other actions are blocked. Even if you remove and replace the
battery and switch on the phone, the communicator will remain locked. To unlock
the communicator, press Unlock and enter the lock code. For more information on
locking and other security options, see 'Security' on page 216.
IMPORTANT: The default lock code is 12345. For security reasons, it is
imperative that you change the lock code. Keep the code secret and in a
safe place, separate from the communicator. For information on
changing the lock code, see section 'Security' on page 216.
Restore factory settings (3-4)
You can reset some of the menu settings to their original values. You need the lock
code for this function. This function will not affect stored phone numbers and
names, access codes, earpiece volume setting, call timers, cost counters, selected
application tones or SMS messages.
Tip: You can also press
Menu and # to enter your
lock code.
61
Advertisement
Table of Contents
