Fax Modem - Nokia 9357715 User Manual

Fax modem

You can use the communicator as a fax modem with a compatible PC. Your
communicator can be connected to a PC via serial cable or by using an infrared
connection.
Before your PC can recognise the communicator as a fax modem, you need to
install a new modem configuration for your PC. Please refer to your operating
system manual for more information. During the installation you may be asked to
enter the path to the modem information file. The path on the sales package CD-
ROM is: \ Software for PC \ Printer and Modem drivers. Advanced users can also
find a list of supported AT commands from this path. Normally there is no need to
use these commands.
Note: Using the communicator as a fax modem requires that data calls are
supported by the network operator and that this service is active in your
SIM card.
To install fax modem driver using cable
connection
1 Start Windows.
2 Insert the Nokia 9210i CD-ROM into the CD-ROM drive of the computer and
locate the modem information file (mdmn9210i.INF). Alternatively, you can
find the file on the www.forum.nokia.com Web site.
3 Double-click the Modems icon in the Windows Control Panel. A dialog opens. If
no modem drivers have been installed on the computer before, continue from
step 6.
4 Click the Add button.
237