Nokia 9357715 User Manual page 261

If you are using the PC Suite for Nokia 9210i Communicator program on your PC,
or if you want to receive data from another communicator or a digital camera, you
must activate the Infrared connection on your communicator before the
connection is made. See PC Suite Guide in the sales package CD-ROM and 'To
activate the infrared connection' on page 35 of this guide.
The PC to which you want to establish the connection must have an IrDA
compatible infrared port; installed and activated IrDA drivers; and Microsoft
Windows 95/98/98SE/Me. For more information on IrDA drivers and their use in
Windows, contact Microsoft.
If you have an IBM Thinkpad laptop with Windows 98 SE installed, you may
encounter problems with infrared connections. If problems occur, proceed as
follows:
1 Click the Windows Start button and select Settings > Control Panel.
2 In the Windows 98 Control Panel, open System.
3 In the System properties dialog, select the Device Manager tab.
4 Under Network Adapters, select IBM Thinkpad Fast Infrared Port and click the
Properties button. IBM Thinkpad Fast Infrared Port Properties dialog opens.
5 Click the Driver tab and then click the Update Driver... button. Update Device
Driver Wizard starts.
6 Click Next.
7 Select the Install one of the other drivers option and click the View List... button.
8 Infrared PnP Serial Port has been found. Click OK.
9 Click Next.
10 Infrared PnP Serial Port is ready to be installed. Click Next.
11 The new driver has been installed. Click Finish.
12 The computer must be restarted before the new driver can be taken to use. Click
Yes to restart the computer.
249