Operation Of Control Panel - Sharp AX-1600R Operation Manual

OPERATION OF CONTROL PANEL

The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Touch Control Panel Layout
1
3
5
7
Display Information
2
3
AX1600 En,P01-20 5 AX1600 En,P01-20 5
1. SuperSteam pad
Press to select SuperSteam cooking.
SuperSteam has 2 options; "automatic cooking" and "manual cooking".
2. Pure Steam pad
Press to select Pure Steam cooking.
Pure Steam has 2 options; "automatic cooking" and "manual cooking".
3. Convection pad
Press to select Manual Convection cooking.
No automatic cooking mode for Convection.
4. Microwave pad
2
Press to select Microwave cooking.
Microwave has 3 options; "auto defrost", "sensor reheat" and "man-
4
ual cooking"
5. Back/Info pad
6
Press to go back to the previous page during programming before
pressing START.
8 Press to do maintenance to your oven, or customise it.
6. Enter pad
Press to confi rm your choice.
7. Stop/Clear pad
Press to clear during programming.
9
Press once to stop operation of oven during cooking; Press twice
to cancel cooking programme.
8. START pad
Press to start oven after setting programmes.
9. Knob
Turn to select desired option.
Arrows indicate more than one page; when you
1
see an arrow, you can turn the knob to move
1
back and forth between pages. When there
are no arrows, you can go back to the previous
page by touching Back/Info.
The illustration at the top of display indicates the se-
2
lected cooking mode.
SuperSteam was selected.
Pure Steam was selected.
Microwave was selected.
Convection was selected.
Words will light in the display to indicate features and
3
cooking instructions.
E – 5
15/08/06 16:51 15/08/06 16:51