Plug Replacement (Uk & Ireland Only) - Titan TTB589SDS Safety And Operating Manual

ROTARY HAMMER 700W TTB589SDS
PLUG REPLACEMENT (UK & IRELAND ONLY)
If you need to replace the fitted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
BLUE =NEUTRAL
Brown = Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured blue must be connected to
the terminal which is marked with N. The wire which is
coloured brown must be connected to the terminal which
is marked with L.
Warning:
Never connect live or neutral wires to the earth terminal of
the plug. Only fit an approved 13AMP BS1363/A plug
and the correct rated fuse.
Note: If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable,
it must be destroyed to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
19
13 A mp fuse approved
to BS 1362
Brown L(live)
Cable grip