Drilling Operation - Titan TTB589SDS Safety And Operating Manual

ROTARY HAMMER 700W TTB589SDS
Hammer drilling mode:
For simultaneous drilling and impacting of concrete or
masonry, choose the Hammer drilling position..
Chisel mode:
For impacting only - for light chipping, chiseling and demo-
lition applications choose the Hammer position.
Drilling mode:
For drilling into steel, wood and plastics choose the Rotary
drilling position.
WARNING:The operating mode selector switch may be
actuated only at a standstill.

DRILLING OPERATION

Drilling wood
1. For drilling into wood, ensure the selection switch is
set to the regular drilling function (drilling mode only).
2. When drilling into soft wood, the drill should be oper-
ated at high speed.
3. When drilling into hard wood, the drill should be oper-
ated at low speed.
15