Control Exercised From The Remote Camera Controller Aw-Rp50 - Panasonic AW-HE60HN Operating Instructions Manual

Basic operations
● ■
Control exercised from the Remote Camera Controller AW‑RP50
POWER
MENU
STORE
IRIS
TELE
ZOOM
● ●
Procedure for camera menu operation
(AW‑RP50)
1
Press one of the [CAMERA STATUS/
SELECTION] buttons to select the unit which
is to be operated.
2
Press the [CAMERA OSD] button of the
AW‑RP50 for 2 seconds.
The camera menu of the AW-HE60 is displayed on the
monitor.
3
Turn the F1 dial to select the AW‑HE60 camera
menu item or change the data.
Turn the F1 dial to move the cursor up or down or
change the setting.
Press it to move to the menu at the next lower
hierarchical level or change a blinking setting at the very
bottom hierarchical level.
4
Press the [CAMERA OSD] button for 2 seconds
to exit the camera menu.
(continued)
ALARM
1 2 3
PAGE GAIN/PED R/B GAIN R/B PED
6 7 8
DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2 3
AUTO
CAMERA STATUS / SELECTION
AUTO
WIDE
FOCUS/PUSH OAF
For selecting the cameras to be operated.
F1
F2
F1 CAMERA
OSD
4 5
AWB/ABB SHUTTER F2 EXIT
9 10
SETUP SYSTEM USER1 USER2
4 5
PT ACTIVE
LOW HI
PTZ/FOCUS SPEED
● ●
Procedure for switching between Day
and Night mode (AW‑RP50)
1
Press the [MENU] button on the AW‑RP50.
The [MENU] button lights and the [PRESET MEMORY/
MENU] button becomes available.
2
Press the [9(SETUP)] button in the [PRESET
MEMORY/MENU].
The [SETUP] menu opens on the LCD panel.
3
Turn the F1 dial to select [FUNCTION] and
press the F1 dial.
4
Turn the F1 dial to select [OPTION].
Off or On appears at the lower right (F2 area) of the
LCD panel.
5
Turn the F2 dial to select "Off" or "On" and
press the F2 dial.
Off: Day mode
On: Night mode
For operating the camera menus.
CAMERA OSD:
When this is pressed for
2 seconds, the selected camera
menu is displayed, overlapping
the camera output image.
When it is pressed for
2 seconds while a camera
menu is displayed, the menu is
cleared.
F1: Turn F1 to move the cursor up
or down on the camera menu or
change the setting.
Press it when moving to
the menu at the next lower
hierarchical level or changing
a setting at the very bottom
hierarchical level.
39