Panasonic AW-HE60HN Operating Instructions Manual page 68

Controls and settings from web screen
Image capture size [QVGA, VGA]
<Initial setting: VGA>
QVGA or VGA is selected here as the H.264 image
resolution.
Transmission priority
[Constant bit rate, Frame rate]
<Initial setting: Frame rate>
The transmission mode of the H.264 images is set here.
Constant bit rate
Frame rate
Note
● ● When "Frame rate" is selected as the "Transmission
priority" setting, there may be a reduction in the
number of users who can be connected.
Frame rate
[1fps, 3fps, 5fps*, 7.5fps*, 10fps*, 15fps*, 20fps*,
30fps*]
<Initial setting: 30fps*>
The frame rate of the H.264 images is set here.
Notes
● ● This setting can be selected only when "Frame
rate" has been selected as the "Transmission
priority" setting.
● ● "Frame rate" is linked to "Max bit rate (per client)*".
If a value indicated by an asterisk (*) has been
selected, the frame rate may become slower.
68
The H.264 images are
transmitted at the bit rate which
was set by "Max bit rate (per
client)*".
The H.264 images are
transmitted at the frame rate
which was set by "Frame rate".
(continued)
Max bit rate (per client)*
[64kbps, 128kbps*, 256kbps*, 384kbps*,
512kbps*, 768kbps*, 1024kbps*, 1536kbps*,
2048kbps*, 3072kbps*, 4096kbps*, Unlimited*]
<Initial setting: 2048kbps*>
The H.264 bit rate per client is selected here.
Notes
● ● "Unlimited*" can be selected only when "Frame rate"
has been selected as the "Transmission priority"
setting.
● ● The H.264 bit rate is linked to the "Bandwidth
control(bit rate)" of the Network setting (see page 89).
If a value indicated by an asterisk (*) is selected,
the bit rate may become slower than the value
which has been set.
Image quality
[Low(Motion priority), Normal,
Fine(Image quality priority)]
<Initial setting: Normal>
The image quality of the H.264 images is selected here.
Note
● ● This setting can be selected only when "Constant
bit rate" has been selected as the "Transmission
priority" setting.
Refresh interval
[0.2s, 0.33s, 0.5s, 1s, 2s, 3s, 4s, 5s]
<Initial setting: 3s>
The H.264 image refresh interval (I-frame interval:
0.2 seconds to 5 seconds) is selected here.
When there are many errors in the network environment,
setting a short refresh interval reduces the disturbance in
the images.
However, the image refresh speed may also be reduced.