Wireless Remote Controller (Optional Accessory) - Panasonic AW?HE120WP Operating Instructions Manual

Parts and their functions
w Wireless remote controller
p
(optional accessory)
1 ON/STANDBY button
Each time this is pressed for 2 seconds, operation
switches between turning on the unit's power and
establishing the standby status.
2 Signal transmission window
3 MENU button
Each time this is pressed for 2 seconds, operation
switches between displaying the unit's camera menu and
exiting the camera menu.
When it is pressed quickly (for less than 2 seconds)
while a camera menu is displayed, the setting change is
canceled.
Furthermore, the pan and tilt movement range limits
(limiters) are set and released by operating the MENU
button, PRESET/LIMIT button and the pan-tilt buttons
([], [], [] and []).
For details, refer to "Setting/releasing the limiters" (pages 87
to 88 in the <Operations and Settings>).
(continued)
4 CAM1 to CAM4 buttons
These are used to select the units that are to be operated.
Once a button has been selected, the unit corresponding
to the selected button can be operated.
5 SET button
If this button is held down for 2 seconds when the AWB A
memory or AWB B memory has been selected for the
white balance adjustment, the black balance and white
balance are adjusted automatically and registered in the
memory selected.
When this button is pressed for under 2 seconds, only the
white balance is adjusted automatically.
6 MODE button
This is used to select the video signals which are output
from the unit.
Each time it is pressed, the signals are switched between
the color bar signals and camera video signals.
Note
p  The setting for the Down CONV. Mode item when
color bars are displayed is fixed at "Squeeze".
7 GAIN buttons [OFF] [LOW] [HI] [AUTO]
These are used to set the gain.
The gain increase can be set in three steps using the
[OFF], [LOW] and [HI] buttons.
[LOW] is set to 9 dB, and [HI] is set to 18 dB.
When the [AUTO] button is pressed, the AGC function
is activated, and the gain is adjusted automatically
depending on the light quantity.
The maximum gain of the AGC function can be set using
the camera menu.
8 Preset memory call buttons [1] to [12]
These are used to call the information on the unit's
directions and other settings, which have been registered
in the unit's preset memories No.1 to No.12, and
reproduce those settings.
Settings in preset memories No.13 and above cannot be
called from the wireless remote control.
9 PRESET/LIMIT button
This is used to register the settings in the preset
memories or set or release the limiters.
When a preset memory call button is pressed while the
PRESET/LIMIT button is held down, the information on
the unit's current direction and other settings is registered
in the call button.
Preset memory call buttons [1] to [12] correspond to the
unit's No.1 to No.12 preset memories.
37