Table of Contents
Advertisement
Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
2
Visual
indicator B
If required, open
the cover
(press lever).
Rinse aid indicator (depending on model)
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the
appliance.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty
drying and a higher rinse aid setting will not improve the situation.
Detergents with rinse aid incorporated may be effective only with longer programmes. In the case of shorter programmes, detergent residue may be a problem (if necessary, use powder detergent). Detergents
with rinse aid incorporated tend to form excess suds.
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier's recommendations.
3
The indicator lamp on the control panel lights up when RINSE AID NEEDS
TO BE ADDED.
Open the cover A
Only fill the
(press lever).
detergent dispenser
prior to starting a
wash programme.
Add rinse aid
to max.
line ~100 ml
Tablet / gel / powder
Use one tablet per one cycle, only placed in
detergent dispenser.
All types of tablets can be used, but for 2 in 1
type adding of salt is mandatory.
The rinse aid dosage can be adjusted to the
detergent used. The lower the setting, the less
rinse aid is dispensed (factory setting: position 4).
Press the lever to open the cover. Using a coin or
similar object, turn the arrow to the desired
setting. After adjusting the rinse aid setting, shut
the cover again.
dark: OK.
Daily check
clear: NEEDS TO BE ADDED
Daily use
GB -3-
Advertisement
Table of Contents
