Table of Contents
Advertisement
Lock code
You'll need the lock code to activate and deactivate Phone Lock, or to
change your lock code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row,
the security code (see page 58).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter Menu 4-4-2-4 (Settings - Security settings - Access codes -
Change lock code) and press Select.
2. Enter current (or default) lock code and press OK.
3. Enter new lock code, press OK.
4. Re-enter new lock code for verification, press OK.
Note: When you change your lock code, make sure you store it in a safe
place, away from your phone. Avoid entering access codes similar
to emergency numbers to prevent accidental emergency calls.
• Call restrictions
This feature allows you to restrict incoming and outgoing calls. Outgoing
calls are restricted from a list of restrictions that you create yourself.
Incoming calls are restricted to the All calls option (you cannot create a
list of restrictions for incoming calls).
Restricting outgoing calls
Upon selecting Restrict outgoing calls from the menu, you are presented
with the following options:
• Select allows you to select call restrictions from the outgoing calls list.
Note: This menu option is available only when one restriction has
been enabled.
• Add restriction allows you to create your own list of outgoing call
restrictions.
phone will prompt you for
your
[ 59 ]
Security settings
Advertisement
Table of Contents
