Table of Contents
Advertisement
Saving calling card information
1. Press Menu 4-2-4.
2. Scroll to the calling card you want to edit, then press Options.
3. Scroll to Edit, then press OK.
4. Enter your security code (see page 58), then press OK.
5. At Dialing sequence, press Select. Scroll to the dialing sequence your
card uses, then press Select.
6. Enter access number (usually the 1-800 number listed on the back of
the calling card), then press OK.
7. Enter your card number and/or PIN, then press OK. Your phone
displays Save changes? Press OK.
8. Scroll to Card name, then press Select. Enter the card name using
your phone's keypad, then press OK.
Note: This procedure might not work with all calling cards. Please look
at the back of your calling card or contact your long distance
company for more information.
Dialing sequence
Access number
+ phone number
+ card number
Access number
+ card number
+ phone number
Prefix
+ phone number
+ card number
Use for cards that
require you to:
Dial 1-800 access number, then
phone number, then card
number (+ PIN if required)
Dial 1-800 access number, then
card number (+ PIN if required),
then phone number
Dial the prefix (any numbers
that must precede the phone
number) and phone number you
want to dial, then card number
(+ PIN if required)
[ 40 ]
Cards using this
sequence
MCI, AT&T True
Choice, Sprint
Canada, Unitel
networkMCI,
WorldPhone
MCI, AT&T
Verizon, PacBell,
AT&T, Stentor
Advertisement
Table of Contents
