Canon FS30 Quick Manual page 148

Additional Information
/
BUILT-IN MEMORY ERROR
- The built-in memory could not be read. This may indicate a problem with the camcorder. Consult a Canon
Service Center.
/
BUILT-IN MEMORY FULL
- The built-in memory is full ([
some space.
/
CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem
with the camcorder or battery pack. Consult a Canon Service Center.
/
CANNOT COPY
- The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete
some recordings on the memory card (
CANNOT DIVIDE THE SCENE. INITIALIZE ONLY USING THE CAMCORDER.
- The scene could not be divided because data could not be added to the camcorder's file management data.
Save the recordings (
files and try dividing the scene again.
- Use the supplied supplied software ImageMixer 3 SE Transfer Utility to transfer the scene to a computer and
divide it.
CANNOT EDIT
- Cannot move or delete original scenes or scenes in the playlist.
CANNOT EDIT CHECK THE CARD
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 31).
CANNOT ENTER THE STANDBY MODE NOW
- The camcorder cannot enter the standby mode if the remaining battery charge is too low.
CANNOT PLAY BACK
- There is a problem with the memory.
/
CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT PLAY BACK CHECK THE CARD
- There is a problem with the memory card.
/
CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE
CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 31).
CANNOT PLAY THE MOVIES ON THIS CARD
- Movies cannot be played back from a memory card with a capacity of 64 MB or less.
92
END] appears on the screen). Delete some recordings (
41, 61) or reduce the number of scenes to copy.
72) and initialize the memory (
/
31). Write back the backup
41, 61) to free