Basic Playback; Playing Back The Video - Canon FS30 Quick Manual

Video

Basic Playback

Playing Back the Video

1
Set the camera mode dial to
or .
2
Press .
• Even if the camcorder is off,
pressing
camcorder in playback mode.
• The original movies index screen
appears after a few seconds.
3
Move ( , ) the selection
frame to the scene you want to
play back.
Push the joystick (
selection frame and browse (
through whole index pages. Push the
joystick ( ) to return to the index
screen.
36
( 24)
will turn on the
) to extend the
)
4
/
Press or
playback.
• Playback will start from the scene
selected and continue until the end
of the last scene recorded.
/
• Press again to pause the
playback.
• Press to stop the playback
and return to the index screen.
A
DJUSTING THE VOLUME DURING PLAYBACK
1 Push the joystick (
the joystick guide.
2 Push the joystick (
the top row.
3 Adjust ( ) the volume.
To turn off the volume, keep the
joystick pressed (
the volume bars disappear.
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the operating mode.
• You may not be able to play back with
another device the movies you recorded
on the memory card with this
camcorder. In such case, play back the
to begin the
) to display
) to select
) toward until