Throttle Cable; Front Suspension - Polaris 600 IQ LXT Owner's Manual

MAINTENANCE
Lubrication
Drive Shaft Bearing
Fitting
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should take
approximately two pumps. Do not
use more than four pumps.

Throttle Cable

Lubricate the throttle cable lightly
with grease or oil. With the
engine off, turn the handlebars to
the left and lubricate liberally as
shown.

Front Suspension

The front suspension and steering components do not require
lubrication.
89