Indicators shown in the
standby mode:
- a headset is
connected.
- a loopset is
connected.
- headset
unavailable, connection
to a Bluetooth headset
has been lost.
106
Copyright © 2005 Nokia. All rights reserved.
If the connection to the manually selected network is lost, the phone will sound an error
tone and ask you to reselect a network. The selected network must have a roaming
agreement with your home network, that is, the operator whose SIM card is in your phone.
Cell info display
- Select
On
network based on microcellular network (MCN) technology and to activate cell info
reception.
Enhancement settings
Select the enhancement: Headset, Loopset,
• Select
Default profile
to set the profile that you want activated each time you connect
a certain enhancement to your phone. See Profiles - setting tones, p. '12'.
• Select
Automatic answer
after five seconds. If the Ringing type is set to
is disabled.
Voice commands
Press
and select Tools→
control voice commands in your phone. Voice commands are recorded the same way as
voice tags. See Adding a voice tag to a phone number, p. '30'.
Adding a voice command to an application
You can have only one voice command per application.
1 Select the application to which you want to add a voice command.
To add a new application to the list, select Options→
→
2 Select
Options
Add voice
'30'.
to set the phone to indicate when it is used in a cellular
Bluetooth
handsfree, or
to set the phone to answer an incoming call automatically
Beep once
Voice
com.. Voice commands allows you to add, delete, and
command. See Adding a voice tag to a phone number, p.
Car
kit.
or Silent, automatic answer
New
application.