Nokia 6630 User Manual page 60

60 Copyright © 2005 Nokia. All rights reserved.
• Outgoing mail server (Must be
mail server that sends your e-mail. You may be able to use only the outgoing mail server
of your network operator. Contact your service provider/network operator for more
information.
• Send message - Define how e-mail is sent from your phone:
Immediately - The device starts to establish a connection to the mailbox after you have
selected Send message.
When conn. avail. - E-mail is sent when the connection to the remote mailbox is
available.
• User name - Enter your user name, given to you by your service provider.
• Password: - Enter your password. If you leave this field blank, you will be prompted for
the password when you try to connect to your remote mailbox.
• Incoming mail server (Must be
mail server that receives your e-mail.
• Mailbox type: - Defines the e-mail protocol that your remote mailbox service provider
recommends. The options are
and cannot be changed if you have saved or exited from the mailbox settings. If you are
using the POP3 protocol, e-mail messages are not updated automatically in online
mode. To see the latest e-mail messages, you must disconnect and make a new
connection to your mailbox.
• Security (ports) - Used with the POP3, IMAP4, and SMTP protocols to secure the
connection to the remote mailbox.
• APOP secure login (not shown if IMAP4 is selected for
POP3 protocol to encrypt the sending of passwords to the remote e-mail server while
connecting to the mailbox.
User settings
• E-mails to retrieve (not shown if the e-mail protocol is set to POP3) - Define how many
new e-mails will be retrieved to mailbox.
• Retrieve (not shown if the e-mail protocol is set to IMAP4) - Define which parts of the
e-mails will be retrieved:
defined) - Enter the IP address or host name of the
defined) - Enter the IP address or host name of the
POP3 and IMAP4. This setting can be selected only once
Headers only, Partially (kB), or
Mailbox type) - Used with the
Msgs. & attachs.