i3TOUCH excellence Installation Manual page 20

Choose "Setup"
Follow the on-screen instructions. Tap on the i3TOUCH when the below instructions are shown
on the display or press "enter" when you read the instructions on your computer screen only.
With this step you identify the i3TOUCH as the touch screen to be used in windows. Finish with
"escape".
Now choose "calibrate and press with your finger on the black crosses
After having pressed on all the black crosses, the calibration is finished and the calibration
should be fully accurate. If this is still not the case, contact your i3DEALER. Keep in mind the
windows calibration tool only enables 7 touch points (windows 7 and higher).
20 i3TOUCH EXCELLENCE Installation guide Version 3.5.1