Related Manuals for i3TOUCH P7511
Summary of Contents for i3TOUCH P7511
- Page 1 User Manual i3TOUCH P7511 i3TOUCH P8611 Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.
-
Page 2: Table Of Contents
CONTENTS Important Information Important Safety Precautions Identification of Controls Remote Control Connections Basic Operations Operating the navigation bar Menu List System Settings Connecting to the internet Wireless Presenting & Annotation File Explorer Troubleshooting RS232-C code... -
Page 3: Important Information
IMPORTANT INFORMATION If the screen is not positioned in a stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Use cabinets or stands recommended by the manufacturer of the screen. ... -
Page 4: Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS Servicing---Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power-supply cord or plug is damaged, liquid This symbol indicates that dangerous voltage has been spilled, objects have fallen into the device, the device instituting a risk of electric shock is present has been exposed to rain or moisture, does not operate within this unit. - Page 5 IMPORTANT SAFETY PRECAUTIONS About Location/Environment Do not use this device near water---for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet Do not use in hot and cold rooms (locations) basement or near a swimming pool, and the like. ...
-
Page 6: Identification Of Controls
IDENTIFICATION OF CONTROLS Control Panel This port is connected to internal PC solutions. Notes: USB 2.0 (for camera) Please open the dust cover before being used. It can perfectly support camera’s up to 720p. Wi-Fi module slot Insert a Wi-Fi module (Optional). OPS module slot Insert an OPS module (Optional). - Page 7 IDENTIFICATION OF CONTROLS Connection Panel Antenna Wi-Fi antenna. (Tighten the Wi-Fi antenna in clockwise direction) USB (Type-C) Connect USB devices to this port for Android. Connect USB devices to these ports for Android. Connect USB devices to this port for Android. Note: use this USB-port for software updates. HDMI OUT Connect a monitor to this port, output of the currently screen.
-
Page 8: Remote Control
REMOTE CONTROL NOTES: This operation manual provides a description based on operating functions with the remote control. In different mode, some buttons may have different function. ... -
Page 9: Connections
CONNECTIONS Cautions before Connecting When connecting an external device to the screen, make sure that the screen and the external device are turned off. Check the plugs at the ends of the cables to make sure that they are the correct type before plugging ... -
Page 10: Basic Operations
BASIC OPERATIONS Turning the screen on or off Plug the power cord into an AC power outlet. Switch the Power Switch on the screen on. Now the screen is in standby mode. Wait a moment until the power indicator lights up, then press button to turn on the screen. -
Page 11: Operating The Navigation Bar
OPERATING THE NAVIGATION BAR Attention Two Fingers Please use to pull up OSD menu from screen bottom! Alternatively, press Menu button on remote will bring up OSD menu, as well. System setting Display menu Previous screen Volume Bar Home page Backlight mute function Brightness Bar (Android Interface) -
Page 12: Menu List
MENU LIST Adjusting Picture mode Picture mode Select picture mode. Contrast Adjust the contrast. Brightness Adjust the brightness. Adjust the image hue. (Only for NTSC system) Sharpness Adjust the sharpness. Saturation Adjust the color saturation. Backlight Set up the overall brilliance of the screen. Energy save mode The backlight brightness is decreased. - Page 13 MENU LIST Adjusting Setting menu Source auto switch Select On to automatically recognition source. Color range Select color range. (Only for HDMI mode) HDMI_ARC Select On to turn on enable HDMI_ARC. HDMI out Select HDMI output resolution. Menu timeout Select OSD menu display time. Date/Time Display Date and Time.
-
Page 14: System Settings
SYSTEM SETTINGS Set screen lock Set screen lock to protect your device Change wallpaper Set wallpaper WiFi Select the Wireless Network you would like to connect with Automatic search for bluetooth devices Bluetooth Network setting reset & Ethernet More Screen display settings Display All apps allowed to send Notifications... -
Page 15: Connecting To The Internet
CONNECTING TO THE INTERNET WIRED Plug the LAN-cable into the LAN-port on the bottom of the screen, to connect to the internet. WIRELESS Click on Wi-Fi Turn the Wi-Fi on. Select the connection you want to connect with. To see available networks, turn Wi-Fi on. Fill in your password and press Connect. -
Page 16: Wireless Presenting & Annotation
WIRELESS PRESENTING & ANNOTATION Please ensure the i3TOUCH is connected to the same network as your transmitting device, launch "Present Wireless " on the screen, scan the QR code or visit the download address to download and install i3ALLSYNC application on the transmitting device. -
Page 17: File Explorer
File Explorer Category selection It is available to play the photo, music, movie, etc. Notes: Never remove the USB storage device or turn off the screen while using the USB storage device. It is recommended that you back-up your USB device data. ... -
Page 18: Troubleshooting
TROUBLESHOOTING If, after reading these operating instructions, you have additional questions related to the use of your screen, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Possible Solutions ... - Page 19 RS-232C CODE Introduction This document represents simple UART protocol for controlling system operation using RS232C. Communication Protocol Communication parameter Baud rate 115200 Data Parity None Stop bit Communication general spec ID should show hexadecimal value of assigned ID. ID should be set on menu of the display. ...
- Page 20 RS-232C CODE Command Detailed Explanation Power Control Function : RS232 Controller turns display power on/off Get power on/off status Start Command Data 0xA9 0x11 0xAA 0x8A Set power on/off Start Command Data 0xA9 0x11 Power 0x8A ※Power : Power code to be set on display.
-
Page 21: Rs232-C Code
RS-232C CODE Command Detailed Explanation Panel Backlight Unit Control Function RS232 controller turns display panel BLU power on/off. Get BLU power on/off status Start Command Data 0xA9 0x12 0xAA 0x8A Set BLU power on/off Start Command Data 0xA9 0x12... - Page 22 RS-232C CODE Command Detailed Explanation Volume Control Function Personal computer changes volume of display Get volume status Start Command Data 0xA9 0x13 0xAA 0x8A Set volume Start Command Data 0xA9 0x13 Volume 0x8A ※Volume : Volume value code (0x0 (0)~0x64 (100)) to be set on display. ...
- Page 23 RS-232C CODE Command Detailed Explanation Mute Control Function RS232 controller set mute on/off. Get mute on/off status Start Command Data 0xA9 0x14 0xAA 0x8A Set mute on/off Start Command Data 0xA9 0x14 Mute 0x8A ※Mute : Mute code to be set on display Mute on Mute off ...
- Page 24 RS-232C CODE Command Detailed Explanation Input Source Control Function RS232 controller changes input source of display. Get input source status Start Command Data 0xA9 0x15 0xAA 0x8A Set input source Start Command Data 0xA9 0x15 Input 0x8A ※Input :Input source code to be set on display Data...
- Page 25 RS-232C CODE Command Detailed Explanation Remote Key Function Command for same thing with remote controller. Command remote key Start Command Data 0xA9 0x16 Key code 0x8A Key code : Remote key cod as Annex B. r-CMD Start Command Data...
- Page 26 RS-232C CODE Command Detailed Explanation Key Lock Function RS232 controller set key lock on/off Get Key lock on/off status Start Command Data 0xA9 0x17 0xAA 0x8A Set Key lock on/off Start Command Data 0xA9 0x17 Lock 0x8A ※Lock : Key lock code to be set on display.
- Page 27 RS-232C CODE Command Detailed Explanation Picture Mode Control Function RS232 Controller set Key Picture Mode. Get Key Picture Mode status Start Command Data 0xA9 0x18 0xAA 0x8A Set Key Picture Mode Start Command Data 0xA9 0x18 Mode 0x8A ※Picture mode : Picture mode code to be set on display.
- Page 28 RS-232C CODE Command Detailed Explanation Sound Mode Control Function RS232 Controller Changes Sound Mode of display. Get Sound Mode status Start Command Data 0xA9 0x19 0xAA 0x8A Set Sound Mode Start Command Data 0xA9 0x19 Mode 0x8A ※Picture mode : Sound mode code to be set on display.
- Page 29 RS-232C CODE Command Detailed Explanation Baud Rate Control Function RS232 Controller Changes Baud rate. Get Baud rate Start Command Data 0xA9 0x1A 0xAA 0x8A Set Baud rate Start Command Data 0xA9 0x1A Baud rate 0x8A ※Baud rate : Baud rate code to be set on display. Data Input BAUD_1200...
- Page 30 RS-232C CODE Command Detailed Explanation Freeze Control Function RS232 Controller set Freeze control on/off. Get Freeze control on/off status Start Command Data 0xA9 0x1B 0xAA 0x8A Set Freeze control on/off Start Command Data 0xA9 0x1B Freeze 0x8A ※Freeze : Freeze code to be set on display.
- Page 31 RS-232C CODE Command Detailed Explanation Source Info Visible Control Function RS232 Controller set Source info visible control on/off. Get Source info Visible control on/off status Start Command Data 0xA9 0x1C 0xAA 0x8A Set Source info Visible control on/off ...
- Page 32 RS-232C CODE Annex A Command Type Command Value Range Power control 0x11 0x00~0x01 BLU power control 0x12 0x00~0x01 Volume control 0x13 0x00~0x64 Mute control 0x14 0x00~0x01 Input control 0x15 Input source Remote control 0x16 Remote key value Key lock control 0x17 0x00~0x01 Picture mode control...
- Page 33 RS-232C CODE Annex B Command Type Command Value Range RC_ARC 0x81 Screen size RC_PSM 0xC3 Picture mode RC_SSM 0xC2 Sound mode RC_SLEEP 0xCE Sleep timer RC_INFO 0xB7 Program information RC_STILL 0xB8 Picture freeze RC_TV_VIDEO 0xC0 Input RC_USB 0xBB Discrete input USB RC_TVRF 0xC7 Discrete input RF...