Cable Or Antenna; Cable And Antenna; Connecting A Cable Box; Cable Box And Cable - Sony KP-53XBR200 Operating Instructions Manual

Cable or antenna

Most simple connection. Connection is made
directly from the cable or antenna to the
projection TV.
(Rear of projection TV)
Cable

Cable and antenna

You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
(Rear of projection TV)
CATV cable
Antenna cable
Select Cable or ANT mode by pressing ANT
on the remote control.

Connecting a cable box

Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
VHF/UHF
Cable
IN
Note:
• If you will be controlling all channel
AUX
selection through your cable box, you
should consider using the CHANNEL FIX
feature. (see "CHANNEL FIX" on page
45)
VHF/UHF

Cable box and cable

Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.).
(Rear of projection TV)
VHF/UHF
OUT
*Cable box
*Cable box
(Rear of projection TV)
CATV cable
(unscrambled channels)
For this set up, you can switch between
scrambled channels (through your cable box), and
normal (CATV) channels by pressing ANT on
your remote control.
Notes:
• You may be able to program your Sony
remote control to operate your cable box.
(see "Operating a Cable Box or DBS
Receiver" on page 54)
• During PIP, P&P, CHANNEL INDEX or
FAVORITE CHANNEL viewing, the AUX
input can only be viewed in the main picture.
• If you are connecting a cable box through the
AUX input and would like to switch between
the AUX and normal (CATV) input you
should consider using CHANNEL FIX.
(see "CHANNEL FIX" on page 45)
AUX
VHF/UHF
5